Harrington TM 1 Ton Top Running Motorized End Trucks 35 ft. Span
$5,483.31
For heavy-duty class C single girder crane applications, nothing tops Harrington's top running motorized end trucks. Along with a full range of features, end truck kits include two trucks; two sealed, totally enclosed, non-ventilated (TENV) motors with adjustable D.C. brakes; two helical gear reducers; rubber bumpers; and a bridge beam fastener set. All trucks are fully painted. Bridge fabrication prints are also included. As a member of the Crane Manufacturers Association of America (CMAA), Harrington builds TM trucks to meet current industry and regulatory codes.
| Capacity (Tons) | Product No | Max.Span (ft.) | Wheel Dia.(in.) | Sug. Min.Runway Rail(ASCE#) | Overall Length (in.) | Roller Base (in.) | Wheel Base (in.) | Runway Ctr.Line-Outer Edge (in.) | WidthBeyond Span (in.) | Top Rail toTop End Truck (in.) |
| 1 | TM L/S/H/D-3-0135 | 35 | 3.74 | 30 | 61 | 53 | 43 | 2.1 | 4.6 | 7.1 |
| Capacity(Tons) | Product No | Max.Span (ft.) | ||||||||||
| Speed Codes L and S | Speed Code H | Speed Code D | Weight(lbs) | |||||||||
| One Motor Per End Truck3 Phase 60 Hz | One Motor Per End Truck3 Phase 60 Hz | One Motor Per End Truck3 Phase 60 Hz | ||||||||||
| Output(HP) | Rated Current(amps ea.) | Output(HP) | Rated Current(amps ea.) | Output(HP) | Rated Current(amps ea.) | |||||||
| @230V | @460V | @230V | @460V | @230V | @460V | |||||||
| 1 | TM L/S/H/D-3-0135 | 35 | 0.33 | 1.6 | 1.0 | 0.5 | 2.1 | 1.3 | 0.33 / 0.08 | 1.6 / 1.1 | 0.9 / 0.8 | 325 |
- Frame fabrication from ASTM A500 structural tube for superior strength, rigidity and compactness.
- Reduced wheel friction due to heavy-duty side guide rollers results in smooth crane travel‚ guide rollers are 3 1/2" O.D. (5" on 10 T) with fixed steel axles.
- Minimize assembly labor with fully machined frames‚ girder connection, bracing and collector mounting bracket holes are drilled and tapped for easy installation.
- Suitable for use on ASCE crane rail or square bar‚ wheels are machined steel with flat tread and each has 2 deep groove ball bearings, meeting L10 bearing life criteria for class C cranes.
- Sealed TENV drives with quiet, smooth‚ operating helical gear reducers.
- Gear reducer is designed for easy field conversion between L and S speeds.
- Drives are designed for crane service, with 30 minute rating and feature cooling fins for efficient heat dissipation.
- Externally adjustable D.C. brakes allow controlled deceleration—adjustable up to 50% of rated motor torque.
- Thermal motor protection is standard.
- Drives and brakes are compatible with Electronic Acceleration Control (EAC) and Variable Frequency Drive (VFD).
- Drives are connectable for 230/460V-3-60 (including dual speed models). Other voltages available.
- Rail sweeps and drop stops are standard.
Related Products
