Fomotech Alpha 600 Series, 4 Button Radio Control System-604B
$612.00
Four 2-Speed Buttons
Transmitters are powered by Rechargeable Ni-MH AA size battery 2.4v and come with an Electromagnetic Induction Charger
Different channels available for locations that will use multiple radio units in close proximity. Please select varying channels for these types of applications or consult an Ace radio specialist for help.
Also offered are pendant/radio selector switch and warning device to provide a complete upgrade kit for modernizing any hoisting application!
Frequency Range: |
433 MHz |
Transmitting Range: |
100 meters |
Hamming Distance: |
6 |
Channel Spacing: |
25KHz |
Frequency Control: |
VTCXO (PLL) |
Frequency Drift: |
5 ppm @ -10 ~ +70 |
Frequency Deviation: |
1ppm @ 25 |
Spurious Emission: |
- 50dB |
Transmitting Power: |
0.1mW - 10mW |
Emission: |
F1D |
Antenna Impedance: |
50 ohms |
Enclosure Rating: |
IP65 |
Source Voltage: |
3.0V ( alkaline batteries x 2) |
Current Drain: |
10 ~ 18mA |
Operating Temperature: |
-10 ~ +60 (80 high temperature protection) |
Transmitting power consumption: |
30mA @ 3.5V |
Operating time: |
consecutive 100hrs batteries full(2000mA) band 433MHz, transmitting power 1mW |
Dimension: |
140 x 68 x 30 mm |
Weight: |
220g (include batteries) |
- The transmitter will operate for more than 150 hours of continuous use before replacement of the two AA batteries are required.
- The unit has an advanced microprocessor with highly evolved software that has redundant error checking and correcting capabilities to insure 100% error-free transmission power
- The radio has safety features that include receiver self-diagnosing, transmitter self-diagnosing, transmitter low voltage detection and warning, transmitter and receiver MAIN deactivation when the transmitter is not in use, during transmitter low voltage, and when the system is in sleep mode.
- The encoder/decoder system utilizes advanced microprocessor control. The availability of 32,768 sets of unique ID codes will insure that only commands from the matching control transmitter can be carried out.
- Specially designed 2 step push buttons are extremely durable and reliable for a minimum of up to one million press cycles. Unlike most of the 2-step pushbuttons available, these pushbuttons are easily manipulated even when the operator is wearing gloves. The snap action of the buttons provides positive tactile feedback to the control operator.
- Transmitter enclosures are fully waterproofed, which enable the system to be used in wet or high moisture environments.
- Hermetically sealed transmitter enclosures are made from industrial strength materials that resist breakage from high impacts. The enclosures are also impervious to dust, water, oil, grease, acid, alkaline, heat, sunlight, and are resistant to deformation from long term usage in harsh environments.
- All systems are in full compliance with the FCC Part-15 Rules, European Directives (CE/CB), and Industry Canada (IC), designed and manufactured by an ISO9001 certified company.