Fomotech Alpha 500 Series, 4 Button Replacement Radio Transmitter 520Tr

SKU:
ALPAL520Tr
$294.25
Four 2-Speed Buttons Transmitters are powered by Rechargeable Ni-MH AA size battery 2.4v and come with an Electromagnetic Induction Charger Different channels available for locations that will use multiple radio units in close proximity. Please select varying channels for these types of applications or consult an Ace radio specialist for help.
Current Stock:
Adding to cart… The item has been added

Frequency Range:

433 MHz

Transmitting Range:

>100 meters

Hamming Distance:

6

Channel Spacing:

25KHz

Frequency Control:

Quartz Crystal

Transmitting Power:

0.3mW

Enclosure Rating:

IP-66

Source Voltage:

3.0V (alkaline batteries x 2)

Current Drain:

10 ~ 18mA

Operating Temperature:

-10 + 75 (14 +158)

Dimension:

140 x 68 x 33 mm

Weight:

200g (include batteries)

Modulation:

Narrow Band FM

Decoding Reference:

Quartz Crystals

Frequency Control:

Synthesizer (PLL)

Sensitivity:

-120dbm

Responding Time:

40mS

Output Contact:

250V @10A

Enclosure Rating:

IP-65 / IP-66

Source Voltage:

AC 24V~440V available

Power Consumption:

11VA

Operating Temp:

-10 +75(14 +158)

Dimension:

310mm √ó 134mm √ó 72mm 12.2 x 5.3 x 2.8 (inch)

Weight:

1,625g with output cable (3.6lb with output cable)

  • 100% Error Free Transmission

    Advanced microprocessor with highly evolved software that has redundant error checking and correcting capabilities to ensure 100% error-free transmission, decoding, and control of all output relays. This highly evolved software includes advanced CRC (Cyclical Redundancy Check) and Hamming Code Error (Error Recovery) programming.

  • Safe Design

    Safety features include receiver self-diagnosing, transmitter self-diagnosing, transmitter low-voltage detection and warning, transmitter and receiver MAIN deactivation when the transmitter is not in use, during transmitter low-voltage, and when the system is in sleep mode.

  • 32,769 Unique ID Codes

    The encoder/decoder system utilizes advanced microprocessor control. The availability of 32,768 sets of unique ID codes will ensure that only commands from the matching control transmitter can be carried out without any interference from other radio systems.

  • Main Safety Relay

    For added safety our advanced design utilizes a special Safety Relay for the Main EMS circuit. If the receiver MAIN relay is defective (Example: Fails to open in response to a Stop command) a fault will be detected and the system will shutdown (open) all output relays immediately.

  • 150 Hour Battery Life

    Efficient power saving circuit requires only two "AA" type alkaline batteries. The battery life is good for more than 150 hours of continuous operation between battery replacements, which ensures higher productivity in the workplace by minimizing frequent replacement or recharging of batteries.