Questions? Feedback? powered by Olark live chat software
Alpha 612C2, with Aux Switch, 600 Series Radio Control System, 12 button, (8) double speed pushbuttons + (4) single speed pushbutton

612C2, 12 Button, (8) 2-speed buttons, (4) single speed buttons, 600 Series Alpha Radio Control System

Alpha 612C2, with Aux Switch, 600 Series Radio Control System

12 button, (8) double speed pushbuttons + (4) single speed pushbutton

Transmitters are powered by Rechargeable Ni-MH AA size battery 2.4v and come with an Electromagnetic Induction Charger

Different channels available for locations that will use multiple radio units in close proximity. Please select varying channels for these types of applications or consult an Ace radio specialist for help.

Also offered are pendant/radio selector switch and warning device to provide a complete upgrade kit for modernizing any hoisting application!

Transmitter Specifications

Frequency Range:

433 MHz

Transmitting Range:

100 meters

Hamming Distance:

6

Channel Spacing:

25KHz

Frequency Control:

VTCXO (PLL)

Frequency Drift:

< 5 ppm @ -10℃ ~ +70℃

Frequency Deviation:

< 1ppm @ 25℃

Spurious Emission:

- 50dB

Transmitting Power:

0.1mW - 10mW

Emission:

F1D

Antenna Impedance:

50 ohms

Enclosure Rating:

IP65

Source Voltage:

3.0V (“AA” alkaline batteries x 2)

Current Drain:

10 ~ 18mA

Operating Temperature:

-10℃ ~ +60℃ (>80℃ high temperature protection)

Transmitting power consumption:

< 30mA @ 3.5V

Operating time:

>consecutive 100hrs @batteries full(2000mA) band 433MHz, transmitting power 1mW

Dimension:

235 x 68 x 30 mm

Weight:

350 g (include batteries)

Receiver Specifications

Frequency Range:

433 MHz

Hamming Distance:

6

Channel Spacing:

25KHz

Frequency Control:

VTCXO (PLL)

Frequency Drift:

< 5 ppm @ -10℃ ~ +70℃

Frequency Deviation:

< 1ppm @ 25℃

Sensitivity:

- 120 dBm

Antenna Impedance:

50 ohms

Data Decoder Reference:

Quartz Crystals

Responding Time:

40 ms (normal)

Enclosure Rating:

IP65

Source Voltage:

α604/607/608: DC12V-24V, AC48V, AC110V, AC220V, AC230V, AC240, AC380V α612: DC12V-24V, AC25/36/42/50V, AC110V/240V, AC380-460V @50/60Hz@50/60Hz

Power Consumption:

11VA

Operating Temperature:

-10℃ ~ +70℃

Output Contact Rating:

250V @ 5A

Dimension:

300 x 230 x 86 mm

Weight:

3,400 g (include output cable)

Notable Features of the Alpha 600 Series Radio Control Transmitter:

  • The transmitter will operate for more than 150 hours of continuous use before replacement of the two AA batteries are required.
  • The unit has an advanced microprocessor with highly evolved software that has redundant error checking and correcting capabilities to insure 100% error-free transmission power
  • The radio has safety features that include receiver self-diagnosing, transmitter self-diagnosing, transmitter low voltage detection and warning, transmitter and receiver MAIN deactivation when the transmitter is not in use, during transmitter low voltage, and when the system is in sleep mode.
  • The encoder/decoder system utilizes advanced microprocessor control. The availability of 32,768 sets of unique ID codes will insure that only commands from the matching control transmitter can be carried out.
  • Specially designed 2 step push buttons are extremely durable and reliable for a minimum of up to one million press cycles. Unlike most of the 2-step pushbuttons available, these pushbuttons are easily manipulated even when the operator is wearing gloves. The snap action of the buttons provides positive tactile feedback to the control operator.
  • Transmitter enclosures are fully waterproofed, which enable the system to be used in wet or high moisture environments.
  • Hermetically sealed transmitter enclosures are made from industrial strength materials that resist breakage from high impacts. The enclosures are also impervious to dust, water, oil, grease, acid, alkaline, heat, sunlight, and are resistant to deformation from long term usage in harsh environments.
  • All systems are in full compliance with the FCC Part-15 Rules, European Directives (CE/CB), and Industry Canada (IC), designed and manufactured by an ISO9001 certified company.
Select a Channel
Select a channel for the radio system. If you are using multiple units in close proximity, please select different channels for each radio.
Add a Warning Device
Warning devices are required by ANSI/ASME for radio controlled cranes and hoists. Visual devices (such as a strobe light) and audible devices (such as a warning horn) are excellent ways to meet this requirement. Warning devices are most often remote mounted and can be wired to operate in various ways. If you have questions about how to install a warning device on your piece of equipment, please contact an Ace radio specialist.
Add a Pendant/Radio Selector Switch
A pendant/radio selector switch is often installed to keep the existing pendant control as a backup. The selector allows the operator to change from radio to pendant operation by simply flipping the switch. This is most often installed on the control panel, near the radio receiver.
Rubber Cover
Rubber protection cover
Summary
Base Price: $1,440.00 Customized Price: $1,440.00
  • 01
  • No
  • No
  • Without Cover